A:
First, consider replacing the stock system with something more modern that will work better with your system.
Then, you will need to obtain the driver side door panel. This is the control panel that you will need to access.
The control panel (driver side door panel) is located where the radio and steering wheel are in the car.
From there you will need to access the wiring. It is located under the dash.
You will need to disconnect the existing wire that is currently used by your system.
You will then remove the existing wire.
You will then splice the wire into your new wire.
You will then wrap the new wire under the dash in a way that will accommodate the addition of the new wire.
The new wire needs to be very carefully placed so that it does not interfere with the door panel.
How to remove the old wire?
You will use a pair of pliers to pull the wire off of the existing black box.
This will require a moderate amount of patience on your part.
The old wire is actually really difficult to remove.
It is wrapped with an insulation material.
When you pull the wire out of the black box, it is not coming out as a neat bundle.
It will pull out in the form of loose individual wires.
You need to keep this in mind when you unwrap the wire.
The individual wires will need to be carefully manipulated to get them out of the old black box.
How to splice the new wire?
You will need a wire connector that is compatible with the wire you are splicing into.
You will then pull one end of the connector.
You will then wire the other end of the connector to the end of the new wire.
Once the connector is connected, you will push the new wire back into the old black box.
You will then secure the new wire to the old black box in a way that will accommodate the new wire.
You will then secure the wire underneath the dash in a way that does not interfere with the door panel.
How to replace the old wire with the new wire?
You will use a pair of pliers to pull the old wire out of the black box.
You will then pull the new wire out of the black box.
You will then loop the end of the new wire around the end of the old wire. ac619d1d87
Related links: